CADDX NX8EUA01 Manuel d'utilisateur télécharger pdf (Page 10)

CHANGING USER CODES

Step 1 Your system must be in the Disarmed state to change user codes.

Step 2 Press [

]-[5].

Step 3 Enter a “Master Arm/Disarm Code”.

NOTE: For partitioned systems, someone changing the code of

another person must have access to all or more partitions than

the user being changed.

Step 4 The

ready light

will flash.

Step 5 Enter the 3-digit “user number”. You must always enter 3 digits,

such as [0] - [0] - [3] for user 3, or [1] - [5] - [2] for user 152.

Step 6 Enter the new four (4) or six (6) digit “user code”.

NOTE: To delete a user code, enter [

]-[

] for a 4-digit code,

or [

]-[

] for a 6-digit code.

Step 7 The

ready light

will flash indicating you are back at Step 4 above. If

the code is rejected, the sounder will beep 3 times.

Step 8 If another “user code” needs to be programmed, return to Step 5.

Step 9 Press the [#] key while the

ready light

is flashing to exit the User

Code Programming Mode.

ASSIGNING USER CODE AUTHORITY LEVELS

Assign authority levels to users by following the steps below. Assign user codes

before assigning authority levels.

Step 1 Press [

]-[6].

Step 2 Enter a “Master Arm/Disarm Code”.

NOTE: Someone changing the authority of another person can

only add or remove partition authorization for partitions to

which they have access.

Step 3 The

ready light

will flash.

Step 4 Enter the 3-digit “user number” to be assigned authority (The

ready

light

is constant and the

instant light

will flash).

Step 5 Lights illuminated indicate the authority levels assigned to this code.

An explanation of the lights is listed below. You may toggle (turn

on/off) the authority level by pressing the number for that authority

level.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

CADDX NX8EUA01 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité CADDX NX8EUA01