CADDX NX-8 Manuel d'utilisateur télécharger pdf (Page 19)

NX148E-CF

Open 75

9/25 17:57 P3*

READING THE EVENT LOG

The control panel has an event log that can be retrieved using a master code.

This log contains a listing of the events along with date, time, and partition where

the event occurred.

Step 1 To view the log, press r 9 0 . The LCD screen will prompt you

for a code.

Step 2 Enter your master code. The LCD screen will now show the most

recent event.

Step 3 To view the events from most recent to the oldest, press the – down

scroll key.

Step 4 To view the events from the oldest to the newest, press the • up scroll

key. The display contains the following information.

Event

º ³ User or Zone ID

Date

º » Indicates partition

(Month/Day)

ü Time shown in and r indicates an

24 hour format event not reported

This screen shows an opening of Partition 3 on September 25

at 5:27 p.m. by

user 75. The [r] shows that this event is not programmed to be reported to the

central monitoring station. Refer to Appendix A on page 25 for a list of possible log

messages.

ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD

Step 1 Enter r 9 1 . The LCD Screen will prompt for a code.

Step 2 Enter [master code]. The LCD will now prompt you to raise or lower the

view.

Step 3 Using the scroll keys to the right of the LCD, you can raise or lower the

viewing angle of the text.

Step 4 To advance to the Brightness option, press [r]. The LCD will prompt you

to brighten or dim the LCD lighting. Use the scroll keys again to adjust to

desired brightness.

Step 5 When completed, exit by pressing [r].

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Pas de commentaire

CADDX NX-8 Manuel d'utilisateur Page 19