CADDX NX-8 Manuel d'utilisateur télécharger pdf (Page 24)

NX-148E-CF

KEYPAD CONTROL TONES (BEEPS)

A sounder is built into the keypad and may sound for any of the following

reasons:

 Beeps for all keypresses.

 Sounds a continuous tone during the Entry delay time.

 Pulses when a day zone is violated while the system is disarmed.

 Pulses when a FIRE zone has a trouble condition.

 Pulses when the armed status changes and the AC power is off.

 Beeps 3 times for trying to arm with the “READY” light off, if “FORCE

ARMING” has not been selected.

 Beeps 1 second for the ‘CHIME” feature.

 Beeps 1 second at the end of the exit delay.

 Beeps to indicate telephone line fault if selected.

 Beeps during an exit delay; beeps rapidly for the last 10 seconds of

an exit delay; and beeps 1 second at the end of the exit delay.

 Pulses when one or more of the following conditions are detected:

Zone or Box Tamper, Low Battery, AC Power Fail, or Expander

trouble.

 Beeps 3 times every minute indicating a low battery or missing

transmitter is detected (if wireless device is in system). Entering code

will suppress the sounder for 12 hours.

Entering a valid code will silence the keypad sounder when it is pulsing. The

arm/disarm state of your system will not change when entering a code to silence a

pulsing keypad sounder. Please contact your installer if a trouble condition exists.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

CADDX NX-8 Manuel d'utilisateur Page 24