CADDX NX540 Manuel d'installation télécharger pdf (Page 22)

NX-4 Control

Page 22

COMMUNICATOR CODES FOR SLOW FORMATS ONLY

LOCATIONS 56- 83 ARE ONLY USED WHEN REPORTING EVENTS TO A PAGER OR USING A SLOW FORMAT

SUCH AS 4+2. WHEN USING CONTACT ID OR SIA, THERE IS NO NEED TO PROGRAM THESE LOCATIONS.

LOCATION 56 - AARESTORE@@ CODE (1 segment, numerical data)

Location 56 contains the event code for any zone "Restore" for a 4+2 format. The digit programmed in this location

will be sent as the tens digit in place of the alarm event code. The zone ID will always be reported as the ones

digit of the zone number (i.e. 9 for zone 29).

LOCATION 57 - AABYPASS@@ CODE (1 segment, numerical data)

Location 57 contains the event code for a zone "Bypass" for a 4+2 format. The digit programmed in this location will

be sent as the tens digit. The zone ID will always be reported as the ones digit of the zone number (i.e. 9

for zone 29).

LOCATION 58 - AATAMPER@@ CODE (1 segment, numerical data)

Location 58 contains the event code for a zone "Tamper" for a 4+2 format. The digit programmed in this location will

be sent as the tens digit. The zone ID will always be reported as the zone number (i.e. 9 for zone 29).

LOCATION 59 - AATROUBLE@@ CODE (1 segment, numerical data)

Location 59 contains the event code for a zone "Trouble" for a 4+2 format. The digit programmed in this location will

be sent as the tens digit. The zone ID will always be reported as the zone number (i.e. 9 for zone 29).

LOCATION 60 - AASENSOR LOW BATTERY@@ CODE (1 segment, numerical data)

Location 60 contains the event code for a zone "Sensor Low Battery" for a 4+2 format. The digit programmed in this

location will be sent as the tens digit. The zone ID will always be reported as the zone number (i.e. 9 for

zone 29).

LOCATION 61 - AASENSOR MISSING@@ CODE (1 segment, numerical data)

Location 61 contains the event code for a zone "Sensor Missing" for a 4+2 format. The digit programmed in this

location will be sent as the tens digit. The zone ID will always be reported as the zone number (i.e. 9 for

zone 29).

LOCATION 62 - AADURESS@@ CODE (2 segments, numerical data)

Location 62 contains the tens and ones digits that will be sent for a 4+2 format if the Duress code is enabled in

location 44. Segment 1 contains the tens digit, segment 2 contains the ones digit.

LOCATION 63 - AAKEYPAD AUXILIARY 1" CODE (2 segments, numerical data)

Location 63 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Auxiliary 1" (FIRE) is

enabled in location 23. Segment 1 contains the tens digit, segment 2 contains the ones digit.

LOCATION 64 - AAKEYPAD AUXILIARY 2" CODE (2 segments, numerical data)

Location 64 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Auxiliary 2" (MEDICAL)

is enabled in location 23. Segment 1 contains the tens digit, segment 2 contains the ones digit.

LOCATION 65 - AAKEYPAD PANIC@@ CODE (2 segments, numerical data)

Location 65 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Panic" is enabled in

location 23. Segment 1 contains the tens digit segment 2 contains the ones digit.

LOCATION 66 - AAKEYPAD MULTIPLE CODE ENTRY TAMPER@@ CODE (2 segments, numerical data)

Location 66 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Multiple Code Entry"

(Tamper) is enabled in location 23. Segment 1 contains the tens digit, segment 2 contains the ones digit.

LOCATION 67 - AABOX TAMPER / BOX TAMPER RESTORE@@ CODES (4 segments, numerical data)

Location 67 contains the tens and ones digits that will be sent for a 4+2 format if the "Box Tamper" feature is enabled

in location 37. Segment 1 contains the tens digit of the "Box Tamper". Segment 2 contains the ones digit of the "Box

Tamper". Segment 3 contains the tens digit of the "Box Tamper Restore". Segment 4 contains the ones digit of the

"Box Tamper Restore".

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Commentaires sur ces manuels

Pas de commentaire

CADDX NX540 Manuel d'installation Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité CADDX NX540