CADDX NX-6 Manuel d'installation télécharger pdf (Page 35)

GE Security

Segment 2- Phone N° 1 backup control: Programming a “0” in segment 2 of this

location will cause the NX-6 to make the designated number of attempts to phone N°2

before setting the “Fail To Communicate” condition and stop reporting. Programming a “1”

in this segment will cause the NX-6 to stop trying to communicate after the designated

number of attempts have been made to phone N°1. If a “2” is programmed in this

segment, it will cause the NX-6 to make the dial attempts in increments of two. The first

two attempts will be made to phone N°1, the next two attempts to phone N°2, then

repeating until the total number of attempts designated in Segment 1 is completed.

Format selections

DATA FORMAT DESCRIPTION

0 Local Communicator is disabled

1 Ademco Contact ID DTMF format (see appendix 1-2)

2 Ademco 4/2 Express DTMF format

3 Reserved

4 Reserved

5 Siren Tone Format Siren sound, for domestic dialling*

6 Reserved

SIA (level 1, supporting

level 2 area modifier and

level 3 listen-in block)

FSK format (see appendix 1-2).

8 Reserved

Radionics extended fast

with parity

Extended event code 1800hz transmit 2300hz

handshake single round w/parity 40 PPS

extended hex capability

10 Reserved

Ademco/ Silent Knight

Slow

1900hz transmit 1400hz handshake 10 PPS

double round parity

12 Silent Knight 4+2 fast

Two-digit event code 1900hz transmit 1400hz

handshake 20 PPS double round parity

13 Sescoa/Franklin Fast

1800hz transmit 2300hz handshake 20 PPS hex

double round

SIA (level 1, supporting

level 3 listen-in block)

FSK format (see appendix 1-2)

15 Custom format (See location 18)

16 Vocal format

Voice messages via NX-535, for domestic

dialling*

XSIA (level 1, supporting

level 3 listen-in block)

FSK format (see appendix 1-2)

XSIA (level 1,

supporting level 2 area

modifier and level 3

listen-in block)

FSK format (see appendix 1-2).

Remark (*): The siren tone format (format 5) can be kissed off by pressing the “*” key on the telephone

set (persistent tone of 250 msec. is required).

If you want to trigger a “kiss-off” signal via a GSM, you have to take into account that this

function is network provider dependent.

Entering a valid user code on a keypad will stop the dialler when using the siren or vocal

format.

NX-6-EUR Installation manual Page 35 23/12/04

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

CADDX NX-6 Manuel d'installation Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité CADDX NX-6